3-D Printer & Digitizer

EIC continues to look to technology to assist both entrepreneurs and students alike to fast-track their ability to develop "hard technologies." The most challenging issue for most individuals that have an idea for a product is first desiging it and second building a prototype. 

The design can be as simple as a sheet of paper although with the new computer software it is easy to produce a two or three dimensional drawing of the design. Getting someone to build it depends upon how detailed and/or sophisticated the design of the product. In most cases metal or plastic materials are used for prototyping, although wood and even cardboard can be used for simpler designs. To have a metal or plastic model produced means finding a machine shop or metal fabricator that can machine, cut, weld and stamp out compoents for your design. Using plastic requires, in most cases, some form of injection molding or modeling and that can be difficult to do for a one or two piece only product design. In either case, the prototyping can be very expensive and time consuming. 

The use of 3-D Printing technology allows for rapid three-dimensional designing with exacting measurements. Taking these designs from a wide variety of software packages is easier than ever allowing you to print out your design in less that five hours. The cost of 3-D Printing is 1/100th of what it costs to have a prototype made from a fabricator and 3-D Printing provides for rapid modifications, changes and alterations to your design often in less than one hour. 

EIC has recently ordered a new 3-D Printer from MakerBot. This is their new Replicator model that is their fifth generation unit. In addition, we have ordered one of their Digitizer units that allows us to take an existing product, scan it and digitize it into the MakerWare software, modify it and then print it out. This technology will make prototyping even easier for individuals who want to modify or alter an existing product or part. 

The barriers to entry for building products are large and it is our intent to help minimize those challenges and provide a much simpler, inexpensive method of getting someone's idea from paper to reality. All too often would-be entrepreneurs abandon their ideas and dreams because their initial entry into the world of manufacturing provides too expensive or too onerous. 

Our goal is to provide an easy, smooth and effective process to allow any entrepreneur ( at any age ) to take their idea to the next level which is the design and prototyping phase. It is easy and painless.

Contact EIC through our website at: http://www.englewoodincubationcenter.org, or follow us on Twitter at EIC15 or email us at: This email address is being protected from spambots. You need JavaScript enabled to view it..

The Hard Side Of The New Economy

Why Are Jobs Hard To Find?


I have been using the word "transition" opposed to the overused word "recession" to describe the new economic position the US and most of the world now finds itself. In 2006 I sold my business that was started in 1985 because I saw something happening that convinced me the business world in the US was about to take a dramatic turn for the worse. 

Many of the major US companies shipped their manufacturing, design, R&D and engineering departments to their overseas operations or to China and India. This allowed them to continue to increase their profits while cutting down on operating costs. Even though the economy slowed down from 2006 to 2011 innovation did not stop. It just happened to be coming from outside the US and that was quite alright for the US companies.

As the middle of 2012 came into view it was obvious that much of the cost savings innovation enjoyed by using the overseas operations was beginning to wane. Bringing some of the manufacturing and design operations back to the US seemed like the best idea and it was politically correct. The only problem was much of the younger generation was hooked on soft technology and had little or no experience in developing or working with machines to develop hard technology. In addition, the advent of the smart phone, tablet, etc. etc. put all the knowledge of the world at their fingertips and they were enthraled with the fact that they could develop an App or software package without leaving the confines of their bedrooms. Who wanted to work in a factory and actually make something?

The school systems had long abandoned the trade school programs and instead focused on everyone getting a college degree...not matter what the  discipline. Corporations had retired most of their senior level managers and/or they were forced out on early retirements. Thus leaving companies with little of the knowledge they used to get them to the point they are today.

The colleges did turn out many more well educated students, unfortunately they were not trained to help these companies in this new, ever changing, highly competitive hard technology driven world. Too many MBA's with litte or no experience and very few students studying engineering,  science, math or chemisty. Even fewer taking any advanced manufacturing courses primarly because most universities did not have professors to teach those types of subject matter.

Now we have a younger society that has a complete understanding of how to use a smart phone, app, text, write html, Skype and update their LinkedIn and Facebook accounts but no real understanding of how to actually make something. And companies are complaining they can't find the engineers and scientists they need to compete in this new economy. 

I have had the opportunity to meet a number of young entrtpreneurs through EIC and they all have the same challenges. Finding someone to build their products or help them design their products or just help them understand how they can improve their product ideas. Give them a computer or tablet or smart phone and they can talk to someone half way around the world. Give them a saw and they will cut themselves. 

 

Contact Details

Englewood Innovation Center, Inc.
P.O. Box 465, Englewood, FL. 34295
Phone:  317-796-7617

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.englewoodinnovationcenter.org

 

To Apply

Learn more about the three incubation models, and submit your preliminary application for the one that best meets your needs.

Idea Lab

Accelerator

Resources

 

Registered Users

Latest Tweets

  • @EIC15: Thanks Chris for posting this.
    3 weeks ago - View »
  • @EIC15: Installation of a 2nd TAZ 6 3D Printer at Selby Library Creation Station.
    16 weeks ago - View »
  • @EIC15: We really like it when the Libraries install new 3D Printers. This is the best way for the public to have access to… https://t.co/AgTWRVo3i7
    17 weeks ago - View »
  • @EIC15: For you GoT fans. We have printed a set of your favorite characters along with the Hand pin. We are offering these… https://t.co/b9HJWrjBnV
    17 weeks ago - View »
  • @EIC15: Bio Printing has been around for a few years and this technology has been making huge advances in the development o… https://t.co/MVkWOpEBjv
    17 weeks ago - View »